[INCH-POUND]
A-A-52402A
19 August 2013
SUPERSEDING
A-A-52402
10 July 1992
COMMERCIAL ITEM DESCRIPTION
GUARD, SPLASH, WHEEL
The General Services Administration has authorized the use of this
commercial item description for all federal agencies.
1. SCOPE. This commercial item description (CID) covers the general requirements for guard, splash, wheel.
Guard, splash, wheel covered by this CID are intended for commercial/industrial applications.
2. CLASSIFICATION/PART OR IDENTIFICATION NUMBER (PIN). This CID uses a classification system which
is included in the PIN as shown in the following example (see 7.1).
AA52402
-
001
CID
Size
number
code
(See table l)
3. SALIENT CHARACTERISTICS.
3.1 Interface and physical dimensions. Guard, splash, wheel supplied to this CID shall be as specified herein
(see figure 1).
3.2 Materials. The splash guard shall be made of natural rubber, synthetic rubber, or a mixture of reclaimed
rubber and reinforcing fabric. The fabric shall be good quality cotton, nylon, or equivalent material. The fabric
shall be in woven layers or cords mixed homogeneously throughout the entire compound.
Beneficial comments, recommendations, additions, deletions, clarifications, etc., and any data that may
improve this document should be sent to: DLA Land and Maritime, ATTN: VAI, P.O. Box 3990,
Columbus OH 432183990, or email fluidflow@.dla.mil. Since contact information can change you may
want to verify the currency of the address information using the ASSIST Online database at
AMSC N/A
FSC 2540
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business