METRIC
MIL-PRF-62550/2B(AT)
18 APRIL 2011
SUPERSEDING
MIL-PRF-62250/2A(AT)
30 May 1997
MIL-PRF-62550/1A(AT)
30 May 1997
PERFORMANCE SPECIFICATION SHEET
HEATER ASSEMBLY, COMBUSTION VEHICULAR COMPARTMENT,
17.6 kW, DUAL AIR TYPE (METRIC)
This specification is approved for use by the U.S. Army Tank-automotive and
Armaments Command, Department of the Army, and is available for use by all
Departments and Agencies of the Department of Defense.
The requirements for acquiring the product described herein shall consist of this specification
sheet MIL-PRF-62550(AT).
REQUIREMENTS:
Construction
Heater assembly shall be constructed to the interface and envelope dimensions of the following
figure:
Comments, suggestions, or questions on this document should be addressed to
U.S. Army RDECOM, Tank Automotive Research, Development and Engineering Center,
ATTN: RDTA-EN/STND/TRANS MS #268, 6501 E. 11 Mile Road, Warren, MI 48397-5000
or emailed to DAMI_STANDARDIZATION@conus.army.mil. Since contact information can
change, you may want to verify the currency of this address information using the ASSIST
Online database at https://assist.daps.dla.mil.
AMSC N/A
FSC 2540
DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business